Working while you’re closed
Resilient & Safety Floors
LVT stripped, resealed and protected by morning.
Full strip-and-reseal programmes for luxury vinyl tile in commercial premises — failed dressings removed, a uniform protective finish applied, and your doors open on time.
Fixed proposal for the agreed scope · Access and handover confirmed in writing
Handover planned around your operation
What it is designed to achieve
When the shine fails, the floor follows.
LVT is protected by its dressing. Once that layer wears, traffic starts abrading the tile itself — and what would have been a routine reseal becomes a replacement bill. Stripping and resealing at the right moment is the cheapest decision you’ll make about that floor.
Complete system reset
Old, patchy dressings are fully stripped back before new protection goes down — no build-up, no cloudiness.
Uniform protection
Fresh sealer restores appearance and puts a sacrificial wear layer back between traffic and tile.
Multi-night programming
Larger areas are phased across nights so every section cures fully before it takes traffic.
Replacement avoided
A maintained LVT floor lasts years longer — restoration costs a fraction of relaying it.
When to consider this service
Signs the floor needs a closer assessment.
- Existing dressing is patchy, worn or discoloured
- Traffic lanes remain visible after cleaning
- The floor needs a renewed sacrificial wear layer
Floors and environments covered
Compatible commercial luxury vinyl tile and resilient floors with removable maintenance dressings.
Operational and curing considerations
Timing depends on floor condition, preparation, area size, drying or curing requirements and the access available. These are confirmed in the written proposal before work is agreed.
We work while you’re closed
Delivered out of hours, as standard.
Most contractors expect your business to work around them. We work around you. Here’s what a typical overnight programme looks like — from the moment you lock up to the moment you open on restored floors.
-
17:30
Your business closes
Staff and customers head home. Your premises are handed over under agreed access protocols.
-
18:00
Zest arrives
Our technicians arrive on site with everything needed — no deliveries, no daytime setup.
-
Overnight
Professional restoration
The full restoration is completed while the building is empty. No noise complaints, no closed-off areas.
-
05:30
Final inspection
Every area is checked, dried and signed off against the agreed specification.
-
08:00
You open on restored floors
Doors open at the agreed handover time, to a floor that looks new. Your team simply arrives to the result.
Access, security and keyholding protocols are agreed before any work begins. Weekend and closure-period programmes are available where an overnight window isn’t enough.
Arrange a Free Floor AssessmentHow it works
Four steps. Minimal disruption.
From first phone call to sign-off, the process is designed around your operating hours — not ours.
-
01
Send photos or arrange an assessment
Start with whichever is easier. You do not need to identify the floor or treatment first.
-
02
Receive an honest recommendation
We explain the condition, suitable options and whether restoration or replacement is the better decision.
-
03
Agree the proposal and access plan
The scope, fixed price for the agreed work, timing, access and handover requirements are confirmed in writing.
-
04
Complete and document handover
Work is inspected at the agreed handover point, with records and practical aftercare recommendations supplied.
Ideal for
Where this service earns its keep.
LVT Stripping & Resealing is most in demand from these environments — always delivered around their operating hours.
Questions, answered
What facilities teams ask us.
If your question isn’t covered, the assessment is the fastest way to a straight answer — free and without obligation.
How do I know if my LVT needs resealing rather than just cleaning?
Tell-tale signs are dull traffic lanes that don’t recover after cleaning, patchy shine and scuffs that won’t buff out. An assessment confirms whether the wear layer has failed and what system to apply.
When can the floor take traffic?
That depends on the system, preparation, conditions and cure time. The proposal states when each treated area is expected to return to use.
What finish options are available?
Matt, satin and gloss systems, in standard or heavy-duty PU grades. We recommend a finish based on traffic, appearance and your maintenance regime.
Is stripping noisy or disruptive to neighbours?
The machinery is comparable to standard floor-care equipment. For premises with residents above or adjacent — care homes, mixed-use buildings — we agree quiet-hours constraints in the programme.
Related services
Often booked together.
Most clients combine services into a single out-of-hours programme — one visit, one contractor, one result.
Dr Schutz PU Systems
RAMS Available
Documented Handover
Out-of-Hours Working
£10m Public Liability Insurance
Need LVT Stripping & Resealing — without disrupting your business?
Send us a few photographs for an initial opinion, or arrange a free on-site floor assessment. You’ll receive a written Floor Condition & Restoration Report — a clear recommendation, an itemised proposal and a programme designed around your operating hours. Yours to keep, whoever you choose.
No obligation · No pressure · Cornwall & Devon coverage
Prefer to talk? Call 01752 922414 · free and without obligation